![focusrite scarlett 2i2 driver malfunctin focusrite scarlett 2i2 driver malfunctin](https://support.focusrite.com/hc/article_attachments/115003142365/Screen_Shot_2017-04-10_at_11.39.08.png)
This problem is far from making the device unusable, it's just really annoying and tend to happen when it's least convenient.
#Focusrite scarlett 2i2 driver malfunctin windows#
My second playback device is Modi 3, and it has no issues, using the same configuration (USB, through windows mixer, same sampling frequency and bit depth, enabled audio enhancements for EQ). Strangely enough, a day after that I made another long conference call using the same app, and it didn't have any issues. Every time I changed something it resets to unit and by itself is fixed the issue for several minutes, only to return again. This should not pose too much of a problem, however, since most modern keyboards feature a USB interface as standard and can thus be connected directly to the. I tried changing the sampling frequency, bit depth, buffer size – nothing really seemed to help. Recently I had a more severe issue, when I was making a long conference call with a web based app (), and throughout the call it messed up the sound, distorted, pop, etc. Changing the buffer size doesn't affect things, and increasing it tends to make it worse. It almost always resolves itself by simply toggling to a different playback device in windows, and toggling back. Similarly, you can pair it with a recording tool online to capture remote conversations. If you are co-hosting a conversation locally or recording solo, this is an ideal option. It tends to happen more when I play movies in the computer, where the sampling frequency is 48khz, but it is not limited to those cases. At a glance, Focusrite Scarlett 2i2 is a USB audio interface that you can run one or two XLR microphones on your computer by plugging them. It sounds like sampling has gone off the rails. The issue is this: in rare occasions, there will be a drop-off or a pop while playing, and sometimes it even mangle and distort the sound to a very high degree. and it's also not in exclusive mode, if that matters. I have EQ APO running in the background, so in the sound control panel the device is set to enable enhancement, otherwise the EQ doesn't work. I normally set the device to 44.1khz because it's primarily for music, and the buffer size is at 32. It has an ASIO control panel that sets the sampling frequency and buffer size, but all the sound is routed through the window mixer for most applications.
#Focusrite scarlett 2i2 driver malfunctin Pc#
The way it's configured, I'm using it as a dac and pre-amp going to my active monitors via TRS connection, and it's plugged into my PC via USB. The interface is about 3 years old and works perfectly fine 99% of the time. Just note in advance that I'm not currently interested in replacing the unit with something else, just solving the issue if possible.
![focusrite scarlett 2i2 driver malfunctin focusrite scarlett 2i2 driver malfunctin](https://www.carillonac1.com/images/detailed/1/Focusrite2i2.jpg)
I'm having a little issue with my 2i2 that I don't know what causes it.